beginner
General
Toyota GR Performance Intake (PTR03-18221)
20 minutes
5 tools
6 steps
Installation Steps
1
Open the hood
Open the hood and remove the stock intake duct and airbox assembly.
2
Transfer MAF
Transfer the MAF sensor from the OEM box to the GR intake tube.
3
Mount
Mount the GR intake box using the factory bolts.
4
Reconnect
Reconnect the MAF wiring harness.
5
Refit
Refit all ducting and tighten the clamps to the torque values provided by Toyota.
6
Check
Start the car and check for stable idle and proper airflow.
Rate This Guide
0.0 (0 ratings)
Sign in to rate this guide
Comments
Comments (0)
Sign in to leave a comment
Loading comments...
Tools Required
- 10mm socket and ratchet
- Phillips screwdriver
- Torque wrench
- Needle-nose pliers
- MAF sensor Torx (T20) driver
Need Installation Help?
Loading nearby installers...